Awind WP-920 Manual de usuario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 51
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
38
< Auto-Configuration Network Setup>
The default setting of the wePresent box is DHCP client. When the wePresent box
is connected to a LAN that already has a DHCP server present, the wePresent box
takes an IP address assigned to it by the server. When the wePresent box is
connected to a LAN that does not have a DHCP server, the wePresent box becomes
the DHCP server in the network.
< IP Setup>
You can select “obtain IP address automatically” or “Use the following IP
address”
IP Address: The default value is 192.168.100.10.
Subnet Mask: The default value is 255.255.255.0
Default Gateway: The default value is 192.168.100.10
DNS Server: The default value is 192.168.100.10
<DHCP Server Setup>
You can select “auto(Enable/Disable DHCP Server” or “Disable”)
Start IP: The start IP address of DHCP Server.
End IP: The end IP address of DHCP Server
Subnet Mask: The default value is 255.255.255.0
Default Gateway: The default value is 192.168.100.10
DNS Server: The default value is 192.168.100.10
< Wireless Setup>
Wireless LAN: The default value is “Enable”
Region: default value is “Worldwide”.
SSID: SSID string, max. Length is 32 bytes.
SSID Broadcast: The default value is “Enable”
Channel: to set fixed channel or Auto. The “Auto” means after power
on wePresent, it will scan all of wireless channel and select clear one
channel automatically.
Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit
or 128bit in ASCII or HEX string.
Key: If Encryption is enabled, you have to set key value according to
the encryption mode you selected.
< AP Client>
Connect to Existing AP: Input the SSID of Home WiFi AP you want to
connect.
Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit
or 128bit in ASCII or HEX string.
Key: If Encryption is enabled, you have to set key value according to
the encryption mode you selected.
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 50 51

Comentarios a estos manuales

Sin comentarios