
29
WGA-310 User Manual
→Back
< Auto-Conguraon Network Setup>
The default seng of the WPS box is DHCP client. When the WPS box is connected
to a LAN that already has a DHCP server present, the WPS box takes an IP address
assigned to it by the server. When the WPS box is connected to a LAN that does
not have a DHCP server, the WPS box becomes the DHCP server in the network.
♦
You can select “obtain IP address automatically” or “Use the following IP
address”
♦
IP Address: The default value is 192.168.100.10.
♦
Subnet Mask: The default value is 255.255.255.0
♦
Default Gateway: The default value is 192.168.100.10
♦
DNS Server: The default value is 192.168.100.10
♦
You can select “auto(Enable/Disable DHCP Server)” or “Disable”)
♦
Start IP: The start IP address of DHCP Server.
♦
End IP: The end IP address of DHCP Server
♦
Subnet Mask: The default value is 255.255.255.0
♦
Default Gateway: The default value is 192.168.100.10
♦
DNS Server: The default value is 192.168.100.10
♦
Wireless LAN: The default value is “Enable”.
♦
Embedded AP SSID:SSID string ,max. Length is 32 bytes.
♦
: This is “AP client” mode feature. By this feature you
can let you WPS device to join others Access Point via wireless.
♦
First, enter the exisng AP SSID and required security key in “”
and “”, then reboot your system. Aer these steps, WPS will connect to this
AP by wireless automacally.
♦
The default value of AP client mode is “Disable”, also, LAN funcon will
be disabled during AP client mode.
♦
Region: default value is “Worldwide”.
♦
SSID Broadcast: The default value is “Enable”
♦
Channel: to set xed channel or Auto. The “Auto” means aer power on WPS,
it will scan all of wireless channel and select clear one channel automacally.
♦
Encrypon: you can select “Disable” or one of WEP/WPA/WPA2 64bit or 128bit
in ASCII or HEX string.
♦
Key: If Encryption is enabled, you have to set key value according to the
encrypon mode you selected.
Gatekeeper is designed for ensuring the enterprise network security within WPS box
♦
All Block can block Guest Users(through wireless) to access all office
network(LAN),
Comentarios a estos manuales